Landscape contractors frequently choose Ferris zero-turn mowers. A Ferris zero turn mower with suspension technology is the finest option when you have a lot of ground to cover, and productivity is essential.

It’s a top choice for businesses wanting a mower that can manage the heaviest of workloads thanks to the coveted ICD cutting system that provides the greatest cut possible and its low-maintenance oil changes that last five times longer than competitors.

Ferris zero turn mower problems:

1. Starting Problem
2. Unequitable cuts
3. Driving/traction Problems
4. Vibration
5. Brakes Not Working
6. Unable to raise the mower  
7. Problems With Hydro-Gear System
8. Engine Runs Poorly
9. Wet Grass is Difficult to Mow

But despite all this, people have mentioned having several problems with their Ferris mower. Therefore, we’re going to go through all the most common issues today, look at solutions, and then express our opinions on whether we believe Ferris lawn mowers are pricey or not.

So, let’s consider the issues an owner of a Ferris Zero Turn riding mower can encounter.

9 problems with Ferris zero turn mower

Starting Problem:

While a mower having trouble starting or not starting at all is a pretty common problem, it is typically quite simple to fix. Because there are so many potential failure points, determining the cause can be difficult.

The spark plug should be examined first, especially if the machine frequently starts and stops. This causes a tiny electrical current to be generated, which ignites the internal combustion engine. Therefore, if this part fails, your engine will not be able to run. If it breaks, you can easily replace it because it is so inexpensive.

• Fuel restriction caused by obstructed or broken fuel components
• caused by a blocked air filter, air restriction
• an electrical issue brought on by a bad battery
• Faulty connections
• Faulty electrical parts
• The charging system on a Ferris zero turn lawn mower is inoperable.

Solution for Ferris zero turn Starting Problem

These are some general troubleshooting tips for problems with starting:

• Ascertain that the fuel tank is full
• The energy level is adequate
• Check the carburetor
• Hydraulic system too

Unequal Cuts:

You should anticipate the cut quality to be superb for a riding lawn mower made for commercial-level workloads. And Ferris lawn mowers are generally excellent.

But eventually, the cut quality will deteriorate, and the mowing will become irregular. This is expected and normal.

The blades should be re-sharpened about every 25 hours to guarantee that the cut quality stays as excellent as possible. This will assist in preserving the great, expensive finishing quality you should anticipate.

Solution for Ferris zero turn Unequal Cuts Problem

1. Before cutting, level the deck to prevent uneven cuts.
2. if the blades are dull, sharpen them
3. Deck maintenance
4. Deck replacement or repair

Driving/traction Problem:

If you have a modern model, traction issues with a Ferris zero turn mower are uncommon. However, the Ferris zero turn mower occasionally has traction problems when you mow for longer periods of time. You won’t be able to mow the grass with the cutting blade and it will create a terrible noise if you have traction issues.

Solution for Ferris zero turn Unequal Cuts Problem

Solution for Ferris zero turn Driving/traction Problem

Step 1: To increase the traction of the mower, inspect the blades and the entire lower chassis for accumulated dirt or grass.

Step 2: If you discover that this is ineffective, it might also be a power/engine mower issue that is mistaken for a traction issue.

Step 3: To make sure the engine and fuel levels are optimal; you should check them.

Vibration Problem:

Ferris zero-turn mowers frequently experience vibrations at higher frequencies at both low and high speeds. You should cease using your zero-turn mower until a fix is found if you notice excessive vibration.

You should change the throttle or choke on some models because they weren’t designed to mow at greater angles.

If you are unable to mow wet grass, this may be helpful. If so, you should sharpen the blades and slow down the engine.

Solution for Ferris zero turn vibration problem

• Put down your zero-turn lawnmower.
• Changing the choke or the throttle
• Make your yard more even.
• Orient the blades correctly.

Brakes not Functional:

When you need to make accurate and tight cuts, this can be a very frustrating problem to cope with. The brake calipers wearing out or not being properly set is the most frequent reason of the brakes performing poorly or not at all.

Solution for Ferris zero turn non-functional problem

1. First, replace the calipers.
2. Make sure the blade is set appropriately by checking twice.

Unable to lift the mower

Your mower’s starter and brake may both function well, but you won’t be able to mow if you can’t get the thing started. This can be the result of damaged lifting connections.

This frequently results from worn or damaged lifting linkages; thus, those parts must be replaced.

Solution for Ferris zero lift problem

1. To resolve this issue, make sure that the air filter is not blocked with dirt and debris.
2. When the blockage moves or clears, the engine revs abruptly. You can go to an authorized service facility if you are unable to lift the mower.

Problems With Hydro-Gear System

Since almost all Ferris zero-turn mowers have hydrostatic transmissions, this is a common problem with such machines. During this time, the pump won’t be able to generate pressure.

Solution for Ferris zero turn Hydro Gear system problem

1. Purge the transmission system of air to clean it.
2. With some assistance, a user can complete this routine task on their own.
3. After the air has been removed, if the hydro-gear system is still having problems, you should take it to a licensed dealer since it may suggest a condition that is not user-serviceable.

Engine runs poorly

Your mower may not be operating smoothly or properly for a variety of reasons, including

• Too much fuel is being mixed in.
• Spark plug spacing are very wide.

Solution for Ferris zero turn poor engine problem

1. Air filter cleaning
2. Modifying the choke
3. The engine issue is then fixed by resetting the spark plug gap.

Wet Grass is Difficult to Mow

This zero-turn mower was created by Ferris to simultaneously cut dry and wet grass. It could occasionally be challenging to use this zero-turn mower on wet grass.

Solution for Ferris zero turn wet grass mow problem

1. Reducing motor speed
2. Blade rectification
3. When determining whether the fuel mixture or
4. If the oil level is excessively high, check the spark plugs.
5. Air filter cleaning

How to maintain Ferris zero turn?

Properly refuel your lawn mower:

According to Havens, who attributes this to contractors fueling up with gasoline that has more ethanol than the engine can take, more new carburetors have been installed into mowers this year than in the previous five years.

Store your mower properly

Even overnight exposure to the elements can result in mowers experiencing premature wear from corrosion, which can lead to linkage rusting. Iles says, “Wherever water can build up, it will eventually dry up and create corrosion.” Before storing machinery, always dry them to remove excess water. Havens continues, “We can identify if the units that come into our shop are stored inside or outside by looking at them. They have a day-and-night look. Equipment will last longer if covered trailers are used to transport and store it. Mowers will last longer and require less maintenance if they are kept in a garage, barn, or another dry shelter.

Take note of the tire pressure:

Havens always check the tire pressure of a mower when he hears that it isn’t cutting evenly. He continues, “That will set your deck off and the mower won’t cut level.” For your equipment and its parts to last longer, it’s crucial to maintain tire pressure.

Make the mower deck clean:

Under the deck, debris from mulched leaves and grass clippings can accumulate and harden into a coating of “gunk” that is nearly impossible to remove. This issue can be avoided by regularly cleaning underneath the mower deck. Havens warns that neglecting to clean the bottom of the deck might cause the deck to rust and be difficult on the belts and the unit.

Keep in mind routine mower maintenance:

Most commercial lawn mowers contain 10 to 20 grease fittings that require lubrication to stop metal components from rubbing against one another. When this occurs, Havens claims that “you just get tremendous wear.” He advises carefully reading the operator’s manual, which will include all fundamental maintenance procedures landscapers should take care of to keep a mower in top shape.

Are ferris mowers worth the money?

Yes, Ferris produces high-quality zero-turn mowers. In actuality, the majority of their products are powered by robust Kawasaki and Briggs & Stratton engines. It also uses hydrostatic propulsion methods to function. In addition to riding mowers, Ferris diesel-powered stand-on mowers, push mower alternatives, and zero-turn mowers are also well-known for being good.

Conclusion:

Many folks adore the Ferris zero-turn mower because it is a top-notch performer. There are very few potential problems, and they may even only sometimes manifest. As a result, you may enjoy a terrific mowing experience with this great mower, which has a long lifespan.

FAQ’s